Comments on: N6120 3G connected on Asus Eee PC

By: I, Batangueño

I, Batangueño — Tue, 12 Feb 2008 17:46:11 +0000

Hi Jen, what OS do you use? In XP, once you have installed the drivers, you just have to create a new connection in Networking. The number to dial is *99#. Make sure your phone is configured correctly as well.

By: augustine

augustine — Tue, 12 Feb 2008 13:40:06 +0000

jen…u can check it at http://www.eeeph.com

By: augustine

augustine — Tue, 12 Feb 2008 10:03:59 +0000

yehey!!!..great….i can connect it thru my 6120…

thank you so much……..

By: Jen

Jen — Tue, 12 Feb 2008 08:41:28 +0000

Hi Pare!

Would u know how to connect to the net using K810i?

Thanks! Need ur help on this…

By: I, Batangueño

I, Batangueño — Tue, 12 Feb 2008 00:44:33 +0000

hi…follow these steps and you’ll be happy…

1. Create a dialup profile using your 3G phone as the dialup modem. Usually the N6120 or other 3G- or GPRS-enabled phones wonâ??t appear under the 3G/HSDPA modem list, even when plugged in. They will be detected as dialup modems, though.2. Edit /etc/ppp/peers/dialup1 such that the last few lines appear as follows:modem/dev/ttyACM04608003. Edit /etc/chatscripts/dialup1 such that it looks like this:ABORT VOICEABORT BUSYABORT “NO CARRIER”ABORT “NO DIALTONE”ABORT “NO DIAL TONE”TIMEOUT 120″” ATZOK ATV1E0OK AT+CGDCONT=1,”IP”,”internet”OK ATD*99#CONNECT \c